Alterações no passo nº 4
Edição por Eric Gotcher —
Edição aprovada por Eric Gotcher
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Before peeling the backing off of the new grip tape, line up the grip tape with the deck to make sure it is centered and the correct size. | |
| - | [* black] Once you are satisfied by the centering of the grip tape, peel the backing off and place one end of the grip tape down. |
| - | [* icon_note] Apply the grip tape from one end to the other, pressing out as much air as possible to avoid air bubbles. |
| + | [* black] Once you are satisfied by the centering of the grip tape, peel the backing off of the old grip tape. |
| + | [* black] Apply the grip tape from one end to the other. |
| + | [* black] Press out as much air as possible while applying the grip tape to avoid forming air bubbles under the grip tape. |