Alterações no passo nº 2
Edição por FarmYard Gaming —
Edição aprovada por FarmYard Gaming
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove fixing bolt for air slot manifold | |
| - | [* icon_reminder] To access the heating elements, you need to take off the top part that sits above the cylinder with small vent holes. The entire section |
| + | [* icon_reminder] To access the heating elements, you need to take off the top part that sits above the cylinder with small vent holes. The entire section above the separation line can be removed as a single piece. |
| [* red] To begin, take off the D-shaped screw cover located at the bottom of the oval by pulling it upwards. Once you remove the cover, you'll see a T8 screw that needs to be unscrewed to move forward. |