Histórico do passo nº 1 do guia Fix Overheating Error in Dyson AM09

-	[* black] ~~All~~ you ~~really need to do is~~ set the fan on high in cool ~~mode~~, ~~then pulse~~ compressed air into the ~~linear portions of~~ the ~~rearward slot (where hot air normally comes out)~~.
-	[* icon_note] ~~Beware you will get~~ a lot of dust ~~coming~~ out ~~the forward slot (where~~ ~~cool air comes out). It needs to be on cool to open a flap that lets the dust out the front.~~
+	[* black] To open the area we wish to clean, you should set the fan to high and to cool. After doing this, you can blow compressed air into the area shown on the photo.
+	[* icon_note] Be ready for a lot of dust to come out, this area can get quite dirty over time!