Ir para o conteúdo principal

Alterações no passo nº 4

Edição por Max Bendick

Edição aprovada por Max Bendick

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_note] Both of these pictures were taken after rotating the laptop ninety degrees to the right so that you can see the screws and connection.
+[* icon_note] Rotate the laptop ninety degrees so the screws and connection are visible.
[* black] Remove the two screws highlighted with the Phillips 00 screwdriver.
[* black] Pull the ribbon cable away from the laptop to release the CD drive from the computer.
[* icon_note] A small metal divider may fall when you remove the ribbon cable. It needs to be reattached in between the ribbon cable and the drive when the new drive is put in.