Ir para o conteúdo principal

Alterações no passo nº 1

Edição por Ken Gage

Edição aprovada por Ken Gage

Antes
Depois
Sem alteração

Linhas do passo

[* red] Use a Phillips #1 screwdriver to loosen the two screws on the bottom left-hand side of the hard drive cover.
[* red] Turn each screw until you hear a click.
-[* icon_note] These are captive panel screws and don't come out of the cover.
+[* icon_note] These are captive panel screws and remain with the cover.