Alterações no passo nº 2
Edição por Marissa Baumgartner —
Edição aprovada por Marissa Baumgartner
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_reminder] As the truss rod |
|---|---|
| + | [* icon_reminder] As you adjust the truss rod, listen for fret buzz or dead spots. These usually create a sound that rings out less than it should. Keep adjusting until the guitar reaches its best tone. |
| [* black] For humped necks, loosen the truss rod by turning the Allen wrench counterclockwise. For bowed necks, tighten the truss rod by turning the Allen wrench clockwise. | |
| [* red] Use an Allen wrench that can adjust the truss rod. | |
| [* icon_note] TAKE THIS STEP SLOWLY. To make small adjustments, turn the allen wrench a quarter of a turn at a time, checking the neck regularly. Before beginning, detune your guitar strings, leaving room for strings to be manipulated without snapping. |