Alterações no passo nº 8
Edição por Jeanette Lopez —
Edição aprovada por Jeanette Lopez
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Use a Phillips #1 screwdriver to remove the 6-mm screw near the hard drive. |
|---|---|
| + | [* icon_caution] CAUTION: do not allow hardware or debris into the CPU fan and duct. |
| + | [* red] Rremove the 6-mm screw near the hard drive using a Phillips #1 screwdriver. |
| [* icon_note] This is not a captive screw and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |