Histórico do passo nº 11 do guia Fluorescent Light Ballast Replacement

-	[* black] ~~Install~~ a new ballast ~~by reversing~~ the ~~process of step 10~~.
-	[* ~~black~~] ~~Reconnect all wires according to~~ the ~~picture taken in step 7~~.
-	[* icon_note] ~~There will also be~~ a ~~wiring diagram in the ballast packaging or~~ on ~~the ballast itself~~.
-	[* ~~red~~] ~~Ensure that you strip~~ all wire ends ~~using wire strippers~~ and ~~use ANSI approved wire nut at all wire connections~~
+	[* black] Use a screwdriver to install the new ballast to the light fixture.
+	[* icon_note] Ballast packaging may have a wiring diagram or may be on the ballast itself.
+	[* icon_note] Make sure you strip all wire ends with a wire stripper and use ANSI approved wire nuts on all wired connections.
+	[* black] Reconnect all wires according to your notes or picture, add wire nuts to bare wire ends and twisting clockwise.