Alterações no passo nº 10
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Cover the cut lines with strips of self-sticking mesh tape, overlapping the ends. Press lightly to help them stick—you might have to do one at a time if gravity starts working against you. Pic 1. | |
| [* icon_note] If your mesh isn't the self-sticking kind, use the 3" putty knife to fill the gaps with joint compound and then lay tape along the top of each one. Then continue the process as follows. | |
| - | [* icon_note] You may have to hold one end of the mesh in place occasionally, if it wants to start sliding along with the movements of your putty knife. |