Alterações no passo nº 10
Edição por Karyn McBurney —
Edição aprovada por Karyn McBurney
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Cut the self-sticking mesh tape into the lengths needed to cover the cut lines, overlapping the ends. Press lightly to help them stick--you might have to do one at a time if gravity starts working against you. Pic 1. |
| + | [* black] Use the 3" putty knife to scoop up the pre-mixed joint compound and apply liberally along the mesh tape, working the joint compound through the mesh holes and completely filling the gaps along the wallboard edges. Pic 2. |
| + | [* black] Continue working your way along each cut line, smoothing the joint compound along over the top of the mesh tape to cover it completely, both lengthwise and side to side. You may have to hold one end of the mesh in place occasionally, if it wants to start sliding along with the movements of your putty knife. Pic 3. |