Histórico do passo nº 6 do guia How to Repair a Hole in the Ceiling

	[* black] Use your utility knife to cut the new piece of wallboard, making it a little smaller than the actual size of the ceiling opening, so that the installed piece will have a small gap around the edges. Pic 1.
-	[* black] Unless you have a helper or a very small area to repair, affix a firring strip or similar-sized piece of trim to the wall under the ceiling, running side to side the width of the new piece going in. This will bear the weight of the replacement piece while you are securing it with screws. Pic 2.
-	[* black] Mark an arrow on the trim piece and another arrow on the existing ceiling opposite, both pointing to the *center *of the middle ceiling rafter. These are your points of reference for drawing a line across the new piece to indicate where the drywall screws will go to secure the new piece to the dead center of the middle rafter. Pic 3.
+	[* icon_caution] Unless you have a helper or a very small area to repair, affix a firring strip or similar-sized piece of trim to the wall under the ceiling, running side to side the width of the new piece going in. This will bear the weight of the replacement piece while you are securing it with screws. Pic 2.
+	[* black] Mark an arrow on the wall (or trim piece, as shown) and another arrow on the existing ceiling opposite, both pointing to the *center *of the middle ceiling rafter. Pic 3.
+	[* icon_note] These arrows are your points of reference for drawing a line across the new piece to indicate where the drywall screws will go to secure the new piece to the dead center of the middle rafter.