Histórico do passo nº 2 do guia How to Repair a Hole in the Ceiling

	[* black] Connect your pencil marks along each length. You should now have a penciled outline of a squared-off rectangle on your ceiling. These are your cut lines. Pic 1.
-	[* black] Cut by laying the framing square flat on the ceiling parallel to the area to be trimmed away and drawing the blade of your utility knife straight down along its edge, making a clean, shallow cut in the solid material along both legs. Pic 2.
-	[* black] Support the piece being cut away with your free hand, deepening the cuts until you have cut completely through and the damaged piece can be removed. Pic 3. Note that there might still be old drywall nails or screws holding it to the side rafters; you might need to break the old piece away.
+	[* black] Cut by laying the framing square flat on the ceiling parallel to the area to be trimmed away and drawing the blade of your utility knife straight down along its edge, making a clean, shallow cut in the solid material. Pic 2.
+	[* black] Support the piece being cut away with your free hand, deepening the cuts until you have cut completely through and the damaged piece can be removed. Pic 3.
+	[* icon_note] There might still be old drywall nails or screws holding damaged pieces to the side rafters; you might need to break the old pieces away.