Alterações no passo nº 2
Edição por Austin Blakely —
Edição aprovada por Austin Blakely
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] With screws removed, flip your laptop over and lift the screen as normal. |
|---|---|
| - | [* black] Find the lip between the the keyboard-side of the laptop and the bottom that we unscrewed in step one. |
| - | [* black] Once found, gently use a card, guitar pick, or any thin plastic tool you can get underneath the lip. |
| + | [* black] Flip the laptop over and open the case. |
| + | [* red] Use a plastic opening pick or card to pry at the seams between the plastic palm rests and the back cover. |
| [* icon_note] The edges will ordinarily be the easiest places to start. | |
| + | [* black] Pry all around the case to release the plastic clips, but do not completely remove the palm rest as there are still cables connecting it to the case. |