Alterações no passo nº 1
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Pry up the metal ring | |
| + | [* icon_note] It is possible that toothpaste residues or lime have accumulated underneath the metal ring above the gray rubber gasket. For this reason, the ring may behave somewhat stubbornly during removal. |
| [* black] Insert one arm of a pair of tweezers or a small flathead screwdriver underneath the bottom edge of the metal ring sitting above the grey rubber gasket. | |
| [* black] Use ur tool to carefully pry up the metal ring. | |
| [* icon_note] The metal ring is held in place by small plastic clips. During reassembly make sure, it snaps back into place. | |
| [* icon_caution] When prying up the metal ring be careful not to puncture or tear the grey rubber gasket. |