Ir para o conteúdo principal

Alterações no passo nº 3

Edição por iRobot

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas do passo

+[* black] Turn the remains of the computer over.
+[* black] Remove the following 6 screws:
+ [* red] One 4 mm Phillips at the upper right corner of the logic board.
+ [* orange] One 6 mm Phillips at the front of the computer, near the sleep light.
+ [* yellow] Two 6 mm small-head Philips from the middle of the logic board
+ [* green] Two 7.5 mm small-head Phillips, one on either side of the battery contacts.

Imagem 1

Nenhuma imagem anterior

Adicionado