Alterações no passo nº 3
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] [guide|11677|Prepare an iOpener] (or use a hair dryer or heat gun) and heat the face of the watch to loosen the display adhesive. |
| + | [* black] Leave the iOpener on the watch for at least two minutes to fully heat the screen and soften the adhesive holding it to the case. |
| + | [* icon_note] You may need to reheat the iOpener and repeat this procedure several times until the display adhesive gets loose enough. |