Alterações no passo nº 1
Edição por Brandon Kirklen —
Edição aprovada por Brandon Kirklen
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Lay laptop on it's face and remove the two #1 Phillips screws in the back of the black plastic panel with a raised center. | |
| + | [* icon_note] The screws will not separate from the plastic so back them out until there is a change in the resistance or you feel the screw "top out." |
| [* black] Gently lift the panel using the thumb slot on the side of the panel closest to you while the battery is oriented away. |