Alterações no passo nº 6
Edição por kingdesmond —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* green] Move the black lock on the two large ribbon cables up with a pry tool. |
|---|---|
| - | [* black] Gently pull out the two large ribbon cables from the connector. |
| + | [* green] Move the black lock on the two large ribbon cables up with a pry tool, and gently pull out the two ribbon cables. |
| [* yellow] For the small ribbon cable, pull the lock downwards. | |
| [* black] Gently pull out the small ribbon cable from the connector. | |
| [* black] Set the two small circuit boards aside | |
| + | [* icon_caution] Be careful when removing the delicate ribbon cables not to damage them. |
| [* icon_caution] Be careful when removing the delicate ribbon cables not to damage them. |