Alterações no passo nº 1
Edição por Gena FM —
Edição recusada por Jacob Mehnert
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the screw covers | |
| [* green] Use a flathead screwdriver, tweezers, a toothpick or dental tool to remove rubber covers on screen. | |
| [* icon_note] While doing so, please be sure to remove the rubber screw covers carefully. If they rip or get damaged, you may have to buy new ones. These are NOT required to seal up the console, but for aesthetic purposes and for keeping dirt and water out, you should (re)install the rubber screw covers. | |
| - | [* black] Then using a #00 Phillips head screw driver to remove the screws beneath. |
| + | [* black] Then using a #00 Phillips head screw driver to remove the four 6.3 mm screws beneath. |