Alterações no passo nº 3
Edição por Dominik Schnabelrauch —
Edição aprovada por Dominik Schnabelrauch
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] OLED Screen & Digitizer | |
| - | [* black] Once the screen is warm to the touch, apply a suction cup to the |
| - | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the plastic bezel. Start to cut the adhesive by sliding the opening pick to the |
| + | [* black] Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone. |
| + | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the plastic bezel. Start to cut the adhesive by sliding the opening pick to the bottom right left corner. |