Alterações no passo nº 32
Edição por Gregg Ferry —
Edição aprovada por Gregg Ferry
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Replace fan shield, large boss (as opposed the the small boss) away from electronics board Replace gasket Connect the white connecter from the housing to the electronics board. |
|---|---|
| + | [* black] Place assembly into housing. This gets a little tricky as it does not have a solid fit. Basically, the large square boss, away from the electronics board, that is part of the gasket goes into a receiving cavity in the housing. Place the cover and secure with five (5) screws. |