Alterações no passo nº 1
Edição por Andrew Optimus Goldheart —
Edição aprovada por Andrew Optimus Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Reheat the iOpener in the microwave for ***one minute***. | |
| [* icon_caution] Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than one minute. | |
| - | [* black] Place the heated iOpener on the back of the iPad, along the center. Let it sit there for 90 seconds to soften the battery adhesive. |
| - | [* black] Move the iOpener to the right of the back of the iPad (the side opposite the rear-facing camera), and let the iOpener sit for another 90 seconds. |
| + | [* black] Place the heated iOpener on the left side of back of the iPad. Let it sit there for 90 seconds to soften the logic board adhesive. |