Alterações no passo nº 3
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Unscrew screws in the section of bead that you are going to remove. | |
| - | [* icon_ |
| + | [* icon_note] If it is a vinyl corner bead, then break taped underside with corner of putty knife carefully. |
| [* black] Cut the metal corner bead with tin snips. | |
| [* icon_note] If Vinyl, then use your utility knife. | |
| [* black] Measure new corner bead and cut. | |
| [* black] Place new corner bead on corner and fasten in place using screws or tape. |