Alterações no passo nº 5
Edição por Michael Cioffi —
Edição aprovada por Michael Cioffi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Sand area with 80 grit sandpaper. | |
| - | [* black] Wipe down with damp cloth, sponge or paper towel. |
| + | [* black] Wipe down with damp cloth, sponge, or paper towel. |
| [* icon_reminder] Be careful to not wet down the patch with too much water. Only minimum amount of dampness needed to wipe away sanding dust. | |
| - | [* black] Apply thinner coat of joint compound with 6 or 8 inch putty knife. |
| - | [* icon_reminder] Pay attention to put pressure on outside edge. |
| + | [* black] Apply thinner coat of joint compound with a 6, or 8 inch putty knife. |
| + | [* icon_reminder] Pay attention to put pressure on the outside edge. |
| [* black] Let dry for 2 hours. |