Alterações no passo nº 2
Edição por Robin Taylor —
Edição aprovada por Robin Taylor
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the CPU cooler. | |
| - | [* icon_caution] Does your new processor run hotter than the processor you are replacing it with? This is termed [https://en.wikipedia.org/wiki/Thermal_design_power|TDP ( thermal design power)] and can be easily found with a google search. Check that your existing cooler is designed to dissipate the new processors maximum heat output . If it is not you must replace it! |
| + | [* icon_caution] Does your new processor run hotter than the processor you are replacing it with? This is termed [https://en.wikipedia.org/wiki/Thermal_design_power|TDP ( thermal design power)] and can be easily found with a google search. Check that your existing cooler is designed to dissipate the new processors maximum heat output . If it is not*** you must replace it***! |
| [* icon_caution] Before removing the cooler, unplug the fan from the motherboard. | |
| [* black] You will see the processor as shown. It is held in place to the AM3+ socket by two notches. On the left of the first picture you will see a leaver, pull this leave up till it faces the other way. This will un-tension the retaining mechanism allowing you to remove first one side from its notche the the other. |