Alterações no passo nº 8
Edição por Tyler Turner —
Edição aprovada por Tyler Turner
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using. Put the wire through the loop with about 6" excess. Place the anchors for the wall a few inches above the screws and slightly centered. Pull taught on the wire where the anchors are and put the opposite end of the wire through the loop. |
|---|
Imagem 1
Nenhuma imagem anterior
Adicionado