Alterações no passo nº 4
Linhas do passo
| [* red] Position the hemispherical plates over the left hemispherical hole on the length of the panel. | |
| [* black] Repeat this step with the right length of the panel. | |
| [* icon_note] A hemisphere is the half of a circle. | |
| - | [* orange] Use the |
| + | [* orange] Use the Phillips #2 screwdriver to turn the three #5 wood screws (15mm) and tighten the hemispherical plates along the length of the drop-front panel. |