Alterações no passo nº 1
Edição por Walter Galan —
Edição aprovada por Walter Galan
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] The camera bracket is attached to the front panel by adhesive. The use of a heat gun to soften the adhesive is highly recommended. |
| + | [* black] With the heat gun set on "low", begin heating the perimeter around the camera bracket. |
| + | [* icon_reminder] It is suggested to heat the desired portion in a circular motion pattern to evenly dissipate the amount of heat throughout the device. |