Alterações no passo nº 2
Edição por TooMuchSauce —
Edição aprovada por TooMuchSauce
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove Fan Cover | |
| - | [* |
| + | [* yellow] Next, flip your laptop upside down and remove the 2 sets of screws highlighted in yellow with your Phillips 0 screwdriver, There are 2 sets of 2. |
| [* black] Then open the laptop to roughly 45 degrees and place it on its side as shown. From this position you can wiggle the dust cover off. | |
| [* black] If you are having trouble then open or close the lid a little further. When you have it in the right position it will require no force, it will slide right off. |