Alterações no passo nº 16
Edição por Miroslav Djuric —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Here's an inside look at the projector assembly sans the protective cover. | |
| - | [* red] Light for projecting images is supplied by a very powerful LED that even has its own heat sink to conduct heat to the aluminum front panel. |
| - | [* orange] As light leaves the LED |
| + | [* red] Light for projecting images is supplied by a very powerful LED (shown in red) that even has its own heat sink to conduct heat to the aluminum front panel. |
| + | [* orange] As light leaves the LED it passes through two prisms (shown in orange). |
| [* yellow] A good deal of engineered optical reflection allows the light emitted by the LED to reflect through an LCD or SXRD panel (shown in yellow) and head toward the mirror. | |
| [* blue] Before bouncing off the angled mirror and exiting the camera, the projected image passes through a focusing lens (shown in blue) connected to the slider on the top panel. |