Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Kristen Gismondi

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Use a size 000 Philips head screw driver to remove each of the 4 1.5mm screws.
-[* orange] Use a size 000 Philips head screw driver to remove each of the 3 3.0mm screws.
-[* black] Use the plastic pry tool to remove black speaker.
+[* red] Use a Phillips #000 screwdriver to remove each of the four 1.5mm screws.
+[* orange] Use a Phillips #000 screwdriver to remove each of the three 3.0mm screws.
+[* black] Use the plastic opening tool to remove the speaker.