Alterações no passo nº 5
Edição por Jonathan Nunez —
Edição aprovada por Jonathan Nunez
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Placing new cooler | |
| [* black] Place the new cooler over the cpu and align it with the four corners where the previous cooler was attached to. | |
| [* black] Screw in the cooler, start at a corner and then move on to the corner diagonal from it, making an "X" shape as you screw them in. | |
| - | [* |
| - | [* |
| + | [* icon_note] Dose not have to be tight, just as long as the cooler does not move, and both cooler and CPU are touching. |
| + | [* icon_reminder] Plug in the power of the cooler in the same location of the previous cooler. |