Alterações no passo nº 5
Edição por Jonathan Nunez —
Edição aprovada por Jonathan Nunez
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] If new cooler does not have thermal paste, add it on the cooler |
|---|---|
| - | [* black] Plug the cooler at the same location of the one being replaced. |
| + | [title] Placing new cooler |
| + | [* black] Place the new cooler over the cpu and align it with the four corners where the previous cooler was attached to. |
| + | [* black] Screw in the cpu, start at a corner and then move on the corner diagonal from it, making an "X" shape as you screw them in. |
| + | [* black] Dose not have to be tight, just as long as the cooler does not move, and both cooler and cpu are touching. |
| + | [* black] Plug in the power of the cooler in the same location of the previous cooler. |