Alterações no passo nº 1
Edição por Kristen Staudt —
Edição aprovada por Kristen Staudt
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Use a T6 Torx screwdriver to remove the highlighted screws. | |
| - | [* icon_note] These are the four screws, about 10 mm long, that need to be removed. Be careful with screws as they are small and easy to misplace. |
| + | [* icon_note] These are the four screws, about 10 mm long, that need to be removed. Be careful with the screws as they are small and easy to misplace. |
| [* black] Carefully pry apart the two pieces, laying the back case to the side. |