Histórico do passo nº 5 do guia Blu Grand M2 Display Replacement

-	[* black] Once you have removed the motherboard piece ~~making it easy to slide out~~ the ~~display connector~~
-	[* red] ~~using~~ the iOpener from the IFIXIT kit heat up for 30 seconds in a microwave and apply on ~~device~~ to loosen adhesive. ~~as shown in the figure~~
-	[* icon_~~note~~] ~~using this~~ IOpener can be hot ~~make~~ sure to wear gloves and other safety wear ~~this is made~~ to ~~soften adhesive from the display making it easy to detach the screen~~.
+	[* black] Once you have removed the motherboard piece, flip the phone, and begin using the iOpener.
+	[* red] Using the iOpener from the IFIXIT kit, heat it up for 30 seconds in a microwave, and apply it on top of the screen to loosen adhesive.
+	[* icon_caution] Using the IOpener can be hot. Make sure to wear gloves and other safety wear to resist any burns.