Alterações no passo nº 5
Edição por Christopher —
Edição aprovada por Christopher
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] |
|---|---|
| + | [* black] Once you have removed the motherboard piece making it easy to slide out the display connector |
| [* red] using the iOpener from the IFIXIT kit heat up for 30 seconds in a microwave and apply on device to loosen adhesive. as shown in the figure | |
| [* icon_note] using this IOpener can be hot make sure to wear gloves and other safety wear this is made to soften adhesive from the display making it easy to detach the screen. |