Alterações no passo nº 14
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] de-crowning: not sure if you want to use those pictures. these could replace the previous steps pictures. | |
| - | [* black] Nobody would like to give their crown easily—we're all a little vain. But with some convincing that smart-watch- |
| + | [* black] Nobody would like to give their crown easily—we're all a little vain. But with some convincing that smart-watch-maker's masterpiece gives way. The digital crown is dead, long live the digital crown. |
| [* black] Grab your [https://d3nevzfk7ii3be.cloudfront.net/igi/ZknBmPWYQyIU3EHk|magnifying glass|new_window=true], we're entering [https://d3nevzfk7ii3be.cloudfront.net/igi/VV3ZS1x42sLcrgls|micro-world|new_window=true]: | |
| - | [* black] Crammed into that tiny space we |
| + | [* black] Crammed into that tiny space we see the golden cylinder with its axial marks. When turning the crown these are read by the optical sensor at the end of the flex cable (that used to sit next to the cylinder before we folded it away). |
| [* black] That little folded spring we can spot from both sides is most likely for conducting the electrical signal coming from the back of the watch along both arms through the finger on the crown back to the module that performs the ECG. | |
| [* black] Also we make out the physical button in the back of the housing and a rubber gasket around the shaft of the crown for water protection. |