Alterações no passo nº 2
Edição por Marty Rippens —
Edição aprovada por Marty Rippens
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Using a Phillips #1 screwdriver, remove the 3 screws holding the black plastic cover in place. The screws are located in the same places as the other side. | |
| [* black] Pull upwards and remove the black plastic cover. | |
| - | [* |
| + | [* red] Remove the two screws off of the chip using a Phillips #1 screwdriver. |
| [* black] Pull off the chip with the same method as the black plastic cover. |