Alterações no passo nº 5
Edição por Allison Shinskey —
Edição aprovada por Allison Shinskey
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements. |
|---|---|
| - | [* icon_note] Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board. |
| + | [* black] Remove the screws from the four corners of the circuit board. |
| + | [* black] Remove the circuit board from the top cover. |
| + | [* icon_caution] Do not touch the other side of the circuit board to avoid damaging the circuit elements. |