Alterações neste passo
Linhas do passo
| + | [* black] Place Karma upside down, with the landing gear facing up |
|---|---|
| + | [* black] Using 2.5mm Hex key screwdriver, loosen, but no not remove completely, all four screws located underneath |
| + | [* black] Pop off the landing component by pushing down with thumbs |
| + | [* black] Caution: there is an internal wire connector so do not pop off the landing gear with too much force |
| + | [* black] Unplug connector |
Imagem 1
Nenhuma imagem anterior
Adicionado