Alterações no passo nº 11
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Before you reassemble your phone, be sure to remove all traces of old adhesive from the plastic frame. Use a pair of tweezers and 90%+ isopropyl alcohol to aid with the cleanup process. |
|---|---|
| - | [* icon_caution] If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. |
| + | [* icon_caution] Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments. |
| + | [* black] After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth. |
| + | [* icon_caution] If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, [guide|47482|replace the frame|new_window=true]. |
| + | [* icon_reminder] The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place. |