Alterações no passo nº 1
Edição por Marty Rippens —
Edição aprovada por Marty Rippens
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] There are eight 2mm screws that must be removed from the back of the device. As you remove them it is wise to organize them into a small container or place them on a magnetic project mat for safe keeping. |
|---|---|
| + | [* black] There are eight 2mm screws that must be removed from the back of the device using a Phillips #000 screwdriver. As you remove them it is wise to organize them into a small container or place them on a magnetic project mat for safe keeping. |