Alterações no passo nº 1
Edição por Michaih Ley Bayani —
Edição aprovada por Michaih Ley Bayani
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Using a phillips head #2 screwdriver, unscrew the two 1.0 mm screws on the sides of the tuner. |
|---|---|
| - | [* icon_note] Be sure to keep |
| + | [* red] Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner. |
| + | [* icon_note] Be sure to keep track of the screws if you are using them for the new tuner, unless the new tuner has screws of its own. |