Alterações no passo nº 1
Edição por Austin Gross —
Edição aprovada por Austin Gross
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* |
|---|---|
| + | [* black] Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case. |
| [* icon_note] Screws securing the back panel underneath the adhesive will be exposed. | |
| [* icon_reminder] Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device. |