Alterações no passo nº 11
Edição por Blake Klein —
Edição aprovada por Blake Klein
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] At this point, all ribbon cables should have been removed from the motherboard. If not, please review previous steps! |
|---|---|
| [* red] Use your hand and gently remove the connector to the back up battery for the motherboard. | |
| - | [* black] Remove the |
| + | [* black] Remove the four 4mm Phillips #00 screws from the motherboard. |
| [* black] Lift the board at an angle and pull outwards to dislodge it from the device. |