Alterações no passo nº 11
Edição por codi whittaker —
Edição aprovada por codi whittaker
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] At this point, all ribbon cables should have been removed from the motherboard. If not, please review previous steps! | |
| [* black] Use your hand and gently remove the connector to the back up battery for the motherboard. | |
| - | [* black] Locate the 4 Phillips |
| + | [* black] Locate the 4 Phillips 4 mm screws securing the motherboard to the device and remove them using the Phillips screwdriver. |
| [* black] Lift the board at an angle and pull outwards to dislodge it from the device. |