Alterações no passo nº 11
Edição por Olufemi Adeshina —
Edição aprovada por Olufemi Adeshina
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Locate the # screws securing the motherboard to the device and remove using the Phillips schrewdriver. |
|---|---|
| + | [* icon_note] At this point, all ribbon cables should have been removed from the motherboard. If not, please review previous steps! |
| + | [* black] Locate the 4 Phillips PM2.5×3.5 screws securing the motherboard to the device and remove them using the Phillips screwdriver. |
| + | [* black] Lift the board at an angle and pull outwards to dislodge it from the device. |