Alterações neste passo
Edição por Austin Gross —
Edição aprovada por Austin Gross
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] To access the inside of the laptop, flip the device over with the bottom facing up. Locate the rubber feet at every. corner. Using the ifixit pry tool, break the adhesive between the rubber feet and the case. Screws securing the back panel underneath the adhesive will be exposed. | |
| + | [* icon_note] Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device. |