Alterações no passo nº 5
Edição por Christine Meyers —
Edição aprovada por Christine Meyers
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Carefully insert spring into plastic holes, one is connected to the bottom plastic hinge and the other is attached to the assembly flap. Slide assembly flap back down into place. Be sure the top plastic hinge is locked in place. You’ll notice the spring securely sliding into place as you secure the assembly flap. |
|---|---|
| + | [* black] On the bottom of the assembly flap, carefully insert the spring into the plastic holes. One is connected to the bottom plastic hinge and the other is attached to the assembly flap. |
| + | [* black] Slide the assembly flap back down into place. Be sure the top and bottom plastic hinge is locked into place. You’ll notice the spring securely sliding into place as you secure the assembly flap. |