Alterações no passo nº 5
Edição por Venancio Zuniga —
Edição aprovada por Venancio Zuniga
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] Avoid pulling the fuse out by grabing the middle of the fuse with your fingers or pliers. Doing so could crush the fuse. | |
| - | [* black] Place the flathead screwdriver under one of the fuse’s metal endcaps. |
| - | [* black] Leverage the screwdriver to flip one end of the fuse up and out. |
| - | [* black] Grab the end of the fuse and slide out the last half of the fuse. |
| + | [* black] Place the head of a Flathead 3/32 Screwdriver under one of the fuse’s metal endcaps. |
| + | [* black] Leverage the screwdriver to flip one end of the fuse up and out of the clip. |
| + | [* black] Grab the metal endcap of the fuse and pull on the fuse to slide the other endcap free from the last clip. |
| + | [* icon_note] Grabbing the fuse with your fingers offers better grip than what you could get with pliers. Using pliers could crush the fuse too easily to get a good grip. |